Safety data sheet
乳化剂OP-10
Revision date : 2006/10/17 Page: 1/6
Version: 1.1 (30089663/MDS_GEN_US/EN)

1. Substance/preparation and company identification
Company 24 Hour Emergency Response Information
BASF CORPORATION
100 Campus Drive
Florham Park, NJ 07932, USA
CHEMTREC: 1-800-424-9300
BASF HOTLINE: 1-800-832-HELP
Molecular weight: 650 g/mol
Chemical family: alkoxylated, alkylphenol
Synonyms: ICONOL OP-10

2. Composition/information on ingredients
CAS Number Content (W/W) Chemical name
9036-19-5 100.0 % Poly(oxy-1,2-ethanediyl), .alpha.-[(1,1,3,3-
tetramethylbutyl)phenyl]- .omega.-hydroxy-

3. Hazard identification
Emergency overview
WARNING: CAUSES EYE IRRITATION.
CAUSES SKIN IRRITATION.
MAY CAUSE RESPIRATORY TRACT IRRITATION.
INGESTION MAY CAUSE GASTRIC DISTURBANCES.
Avoid contact with the skin, eyes and clothing.
Use with local exhaust ventilation.
Wear NIOSH-certified chemical ggles.
Wear protective clothing.
Avoid inhalation of dusts/mists/vapours.
Wear a NIOSH-certified (or equivalent) organic vapour/particulate respirator.
Eye wash fountains and safety showers must be easily accessible.
Potential health effects
Primary routes of exposure
Routes of entry for solids and liquids include eye and skin contact, ingestion and inhalation. Routes of entry
for gases include inhalation and eye contact. Skin contact may be a route of entry for liquified gases.
Acute toxicity:
Ingestion may cause gastrointestinal disturbances.
Irritation:
Irritating to respiratory system. Irritating to eyes and skin.
Safety data sheet
Lutensol* OP-10 Iconol* OP-10
Revision date : 2006/10/17 Page: 2/6
Version: 1.1 (30089663/MDS_GEN_US/EN)
Repeated dose toxicity:
No known chronic effects.

4. First-aid measures
General advice:
Remove contaminated clothing.
If inhaled:
Remove the affected individual into fresh air and keep the person calm. Seek medical attention.
If on skin:
Wash affected areas with water for at least 15 minutes. Skin contact with hot molten substance/product may
cause thermal burns. Seek medical assistance for removal of adhering material.
If in eyes:
Seek medical attention. Wash affected eyes for at least 15 minutes under running water with eyelids held
.
If swallowed:
Immediately rinse mouth and then drink plenty of water, do not induce vomiting, seek medical attention.
Never induce vomiting or give anything by mouth if the victim is unconscious or having convulsions.
Note to physician
Treatment: Treat according to symptoms (decontamination, vital functions), no known
specific antidote.

5. Fire-fighting measures
Flash point: > 204 °C (ASTM D92)
Suitable extinguishing media:
water, dry extinguishing media, foam
Hazards during fire-fighting:
harmful vapours
Evolution of fumes/fog. The substances/groups of substances mentioned can be released in case of fire.
Protective equipment for fire-fighting:
Firefighters should be equipped with self-contained breathing apparatus and turn-out gear.
Further information:
The degree of risk is verned by the burning substance and the fire conditions. Contaminated extinguishing
water must be disposed of in accordance with official regulations.
NFPA Hazard codes:
Health : 2 Fire: 1 Reactivity: 0 Special:

6. Accidental release measures
Personal precautions:
Use personal protective clothing.
Environmental precautions:
Do not discharge into drains/surface waters/groundwater.
Safety data sheet
Lutensol* OP-10 Iconol* OP-10
Revision date : 2006/10/17 Page: 3/6
Version: 1.1 (30089663/MDS_GEN_US/EN)
Cleanup:
Place absorbed material in the same container as the spilled substance/product for disposal.
For small amounts: Pick up with absorbent material (e.g. sand, sawdust, general-purpose binder). Dispose
of absorbed material in accordance with regulations.
For large amounts: Pump off product.
Further information:
High risk of slipping due to leakage/spillage of product.

7. Handling and storage
Handling
General advice:
No special measures necessary provided product is used correctly.
Protection against fire and explosion:
Take precautionary measures against static discharges.
Storage
General advice:
Keep container tightly closed and dry; store in a cool place.

8. Exposure controls and personal protection
Advice on system design:
Provide local exhaust ventilation to control vapours/mists.
Personal protective equipment
Respiratory protection:
Wear respiratory protection if ventilation is inadequate. Breathing protection if breathable aerosols/dust are
formed.
Hand protection:
Chemical resistant protective gloves
Consult with glove manufacturer for testing data.
Eye protection:
Tightly fitting safety ggles (chemical ggles).
Body protection:
Impermeable protective clothing
General safety and hygiene measures:
Handle in accordance with od industrial hygiene and safety practice. Wearing of closed work clothing is
recommended. Wash soiled clothing immediately.

9. Physical and chemical properties
Form: liquid
Odour: odourless
Colour: clear
pH value: 6 - 7.5
Boiling point: > 177 °C ( 1,013 hPa)
Safety data sheet
Lutensol* OP-10 Iconol* OP-10
Revision date : 2006/10/17 Page: 4/6
Version: 1.1 (30089663/MDS_GEN_US/EN)
Density: 1.06 g/cm3
Relative density: 1.06
Solubility in water: soluble

10. Stability and reactivity
Conditions to avoid:
No data available.
Substances to avoid:
oxidizing agent, strong alkalies
Hazardous reactions:
No hazardous reactions when stored and handled according to instructions.
The product is chemically stable.
Decomposition products:
Hazardous decomposition products: No hazardous decomposition products if stored and handled as
prescribed/indicated.
Corrosion to metals:
No corrosive effect on metal.

11. Toxicological information
Acute toxicity
Oral:
LD50/rat: > 500 - < 2,000 mg/kg
Skin irritation:
rabbit: Irritant. (BASF-Test)
Eye irritation :
rabbit: Irritant. (BASF-Test)
Risk of serious damage to eyes.

12. Ecological information
Environmental fate and transport
Biodegradation:
Test method: mod. OECD 301E
Method of analysis: Bismuth-active substance
Degree of elimination: >= 90 %
Test method: OECD 301 A (new version)
Method of analysis: DOC reduction
Degree of elimination: > 70 %
Evaluation: ily biodegradable.
Analous: Assessment derived from products with similar chemical
character.
Environmental toxicity
Safety data sheet
Lutensol* OP-10 Iconol* OP-10
Revision date : 2006/10/17 Page: 5/6
Version: 1.1 (30089663/MDS_GEN_US/EN)
Acute and prolonged toxicity to fish:
lden orfe/LC50 (96 h): 1 - 10 mg/l
Acute toxicity to aquatic invertebrates:
EC50 (48 h): 10 - 100 mg/l
Toxicity to aquatic plants:
EC10 (72 h): 10 - 100 mg/l
Toxicity to microorganisms:
DEV-L2 : > 5,000 mg/l
Other ecotoxicological advice:
Inhibition of degradation activity in activated sludge is not to be anticipated during correct introduction of low
concentrations. Do not release untreated into natural waters.

13. Disposal considerations
Waste disposal of substance:
Dispose of in accordance with national, state and local regulations.
It is the waste generator's responsibility to determine if a particular waste is hazardous under RCRA.
Container disposal:
Dispose of in a licensed facility. Recommend crushing, puncturing or other means to prevent unauthorized
use of used containers.

14. Transport information
Land transport
USDOT
Not classified as a dangerous od under transport regulations
Sea transport
IMDG
Proper shipping name: ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S.
contains (ALKYLPHENOL ETHOXYLATE)
Hazard class: 9
ID number: UN 3082
Packing group: III
Marine pollutant: YES
Air transport
IATA/ICAO
Proper shipping name: ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S.
contains (ALKYLPHENOL ETHOXYLATE)
Hazard class: 9
ID number: UN 3082
Packing group: III
Safety data sheet
Lutensol* OP-10 Iconol* OP-10
Revision date : 2006/10/17 Page: 6/6
Version: 1.1 (30089663/MDS_GEN_US/EN)

15. Regulatory information
Federal Regulations
Registration status:
TSCA, US released / listed
OSHA hazard catery: Acute target organ effects reported, Skin and/or eye irritant
SARA hazard cateries (EPCRA 311/312): Acute
State regulations
CA Prop. 65:
THIS PRODUCT CONTAINS A CHEMICAL(S) KNOWN TO THE STATE OF CALIFORNIA TO CAUSE
CANCER AND BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM.

16. Other information
HMIS III rating
Health: 2 Flammability: 1 Physical hazard: 0
HMIS uses a numbering scale ranging from 0 to 4 to indicate the degree of hazard. A value of zero means that the
substance possesses essentially no hazard; a rating of four indicates high hazard.
Local contact information
myqz1@126.com