苯基三甲基硅烷; 三甲基苯基硅烷; 三甲基苯硅烷
Phenyltrimethylsilane, 99%
Section 1 - Chemical Product and Company Identification
MSDS Name: Phenyltrimethylsilane, 99%
Company Identification: Upkind Technologies Co Ltd
Section 2 - Composition, Information on Ingredients
CAS# Chemical Name Percent EINECS/ELINCS
768-32-1 Phenyltrimethylsilane 99% 212-192-5
Section 3 - Hazards Identification
EMERGENCY OVERVIEW
Flammable. Irritating to eyes, respiratory system and skin.Hygroscopic.
Potential Health Effects
The toxicological properties of this material have not been
investigated. Use appropriate procedures to prevent opportunities
for direct contact with the skin or eyes and to prevent inhalation.
Section 4 - First Aid Measures
Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Immediately flush
eyes with plenty of water for at least 15 minutes, occasionally
lifting the upper and lower eyelids. Get medical aid immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Remove
contaminated clothing and shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Get medical aid immediately. Do NOT induce vomiting. If conscious and
alert, rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Section 5 - Fire Fighting Measures
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Flammable liquid and vapor.
Extinguishing Media:
Use agent most appropriate to extinguish fire.
Section 6 - Accidental Release Measures
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Clean up spills immediately,
observing precautions in the Protective Equipment section.
Section 7 - Handling and Storage
Handling:
Empty containers retain product residue, (liquid and/or vapor), and
can be dangerous. Keep away from heat, sparks and flame.
Storage:
Keep away from heat, sparks, and flame. Flammables-area.
Section 8 - Exposure Controls, Personal Protection
Engineering Controls:
Use adequate general or local exhaust ventilation to keep airborne
concentrations below the permissible exposure limits. Use process
enclosure, local exhaust ventilation, or other engineering controls
to control airborne levels.
Personal Protective Equipment
Eyes:
Wear chemical ggles. Wear safety glasses and
chemical ggles if splashing is possible.
Skin:
Wear appropriate protective gloves and clothing to
prevent skin exposure. Wear appropriate protective
gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant a respirator's use. Wear a
NIOSH/MSHA or European Standard EN 149 approved
full-facepiece airline respirator in the positive
pressure mode with emergency escape provisions.
Section 9 - Physical and Chemical Properties
Physical State: Clear liquid
Color: colorless - green
Odor: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 168 - 170 deg C @ 760.00mm Hg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: 44 deg C ( 111.20 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Specific Gravity/Density: .8730g/cm3
Molecular Formula: C6H5Si(CH3)3
Molecular Weight: 150.30
Section 10 - Stability and Reactivity
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, exposure to moist air or water.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Irritating and toxic fumes and gases.
Hazardous Polymerization: Has not been reported.
Section 11 - Toxicological Information
RTECS#:
CAS# 768-32-1 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Phenyltrimethylsilane -
Not listed by ACGIH, IARC, NIOSH, NTP, or OSHA.
See actual entry in RTECS for complete information.
Section 12 - Ecological Information
No information available.
Section 13 - Disposal Considerations
Dispose of in a manner consistent with federal, state, and local regulations.
Section 14 - Transport Information
IATA
Shipping Name: FLAMMABLE LIQUID, N.O.S.
Hazard Class: 3
UN Number: 1993
Packing Group: III
IMO
Shipping Name: FLAMMABLE LIQUID, N.O.S.
Hazard Class: 3
UN Number: 1993
Packing Group: III
RID/ADR
Shipping Name: FLAMMABLE LIQUID, N.O.S.
Hazard Class: 3
UN Number: 1993
Packing group: III
Section 15 - Regulatory Information
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 10 Flammable.
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 16 Keep away from sources of ignition - No
smoking.
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 37/39 Wear suitable gloves and eye/face protection.
WGK (Water Danger/Protection)
CAS# 768-32-1: No information available.
United Kingdom Occupational Exposure Limits
United Kingdom Maximum Exposure Limits
Canada
CAS# 768-32-1 is listed on Canada's NDSL List.
CAS# 768-32-1 is not listed on Canada's Ingredient Disclosure List.
Exposure Limits
US FEDERAL
TSCA
CAS# 768-32-1 is listed on the TSCA inventory.
Section 16 - Additional Information